Wind energy plant identification: Extremely robust for permanent outdoor use
Wind turbines, transformer platforms and power distribution systems require robust and durable cable markers and nameplates. For an economic planning, erection, operation management, maintenance up to the dismantling of wind power plants it is helpful and necessary to structure them and to clearly mark and label the individual plant components. Texit's cable markers and labels can also be printed easily and flexibly with just one printing system. This saves you time and money during installation. Subsequent maintenance and repair work, as well as troubleshooting, are highly efficient because individual cables can be quickly identified, even in transformer and distribution systems. We make the identification of your installation simple, sustainable and efficient - see for yourself and test our products at your site completely free of charge!
✔️ Permanently legible marking for outdoor use (>10 years, UV-resistant, robust & abrasion-resistant)
✔️ Flexible labeling of different cable types & system components directly on site with only one thermal transfer printer
✔️ Saving of time & costs thanks to the long service life (high security in case of later changes in the design).
✔️ Efficient troubleshooting through easy identification of individual components & parts
✔️ Time & cost savings for subsequent maintenance / repair & replacement work.
✔️ Very easy application and assembly
✔️ Wide range of extremely robust products with long service life
✔️ Benefit from our Texit service & technical support in the long term
![System identification Wind energy Cables](http://en.texit.de/cdn/shop/files/Windenergieanlagen_Kabelkennzeichnung_1500x.png?v=1698850402)
NEW: Cable markers without cable ties
Our new product innovation makes it even easier to mark wind energy cables and cables on transformer platforms, namely WITHOUT assembly tools, cable ties etc. The extremely robust markers are ideally suited for permanent outdoor use or in difficult environments.
![Plant identification](http://en.texit.de/cdn/shop/files/Anlagenkennzeichnung_Kabel_Windenergie_1500x.png?v=1674724781)
Customers we have already been able to inspire:
![](http://en.texit.de/cdn/shop/files/siemens_energy_600x.png?v=1674653383)
![](http://en.texit.de/cdn/shop/files/schaeffler_600x.png?v=1674653533)
![](http://en.texit.de/cdn/shop/files/rexxon_600x.png?v=1674653454)
Cable marker
The HTX-KM cable markers can be used to mark cables of wind turbines and transformer platforms in a permanently legible manner. The markers flexibly adapt to the cable diameter and can be easily labeled with a thermal transfer printing system. They are made of robust polyether polyurethane and are halogen-free and UV-resistant.
![Wind turbines marking](http://en.texit.de/cdn/shop/files/Windenergieanlagen_Kennzeichnung_1500x.png?v=1674573172)
Customers we have already been able to inspire:
![](http://en.texit.de/cdn/shop/files/rexxon_600x.png?v=1674653454)
![](http://en.texit.de/cdn/shop/files/hawe_600x.png?v=1674653500)
![](http://en.texit.de/cdn/shop/files/siemens_energy_600x.png?v=1674653383)
Wind turbines cable marking
Extremely robust for offshore wind turbines
Cable marking for offshore wind turbines is particularly difficult because these turbines are exposed to extreme environmental conditions. This is where our stainless steel markers come in. They are extremely durable and can be lasered or stamped as required. Due to the use of stainless steel, the cable markers are rust-proof and still legible after >10 years.
![Components marking wind turbines](http://en.texit.de/cdn/shop/files/Bauteile_Kennzeichnung_Windenergieanlagen_1500x.png?v=1674572776)
Customers we have already been able to inspire:
![](http://en.texit.de/cdn/shop/files/hawe_600x.png?v=1674653500)
![](http://en.texit.de/cdn/shop/files/schaeffler_600x.png?v=1674653533)
![](http://en.texit.de/cdn/shop/files/ktk_600x.png?v=1674653423)
Wind turbine components marking
Nameplate labels
Components and parts for wind turbines must be labeled with the typical information provided by the manufacturer. Our nameplate labels are an excellent, cost-effective alternative to engraved metal nameplates. The nameplate labels are halogen-free and UV-resistant, making them ideal for outdoor use. With the right thermal transfer printing system, you can print these nameplates flexibly on site.
![Wind turbine marking wind energy test badges](http://en.texit.de/cdn/shop/files/Anlagenkennzeichnung_Windenergie_Pruefplaketten_1500x.png?v=1674725025)
Customers we have already been able to inspire:
![](http://en.texit.de/cdn/shop/files/siemens_energy_600x.png?v=1674653383)
![](http://en.texit.de/cdn/shop/files/ktk_600x.png?v=1674653423)
![](http://en.texit.de/cdn/shop/files/rexxon_600x.png?v=1674653454)
Test badges for safety marking
With the inspection labels, you can properly indicate the next inspection date for all machines and systems. The labels are already provided with a permanently adhesive acrylate adhesive and can be flexibly labeled with the appropriate thermal transfer printing system. Thanks to the document foil used, these stickers are tamper-proof.
Looking for even more wind energy plant identification?
Discover our full range of wind energy turbine identification.
Turbine labeling wind energy made easy
Equipment labeling for wind energy can be fast, simple and straightforward. At Texit, in addition to excellent product quality, we guarantee our customers a special service. You get a trained expert as a fixed contact person who advises you on the suitable products and also takes care of you afterwards, solves problems and optimizes the use of our products on site at your location.
As an ISO-certified company, you can rely on our 20 years of experience in the field of industrial labelling.